| PART |
Description |
Maker |
| SKRVAAE010 SKRVABE010 |
Low-profile 4-direction with Center-push Function (Surface Mount Type)
|
ALPS ELECTRIC CO.,LTD.
|
| SAI01 SAI01-V1 SAI06 |
Surface-Mount, Separate Excitation Switching Type
Surface-Mount Separate Excitation Switching Type
Two-output LNB Supply And Control-voltage Regulator
Surface-Mount/ Separate Excitation Switching Type
Surface-mount and Separate Excitation Type
|
SANKEN[Sanken electric]
ALLEGRO
Sanken Electric Co.,Ltd.
|
| PM5022-2R2M-RC |
Power Inductor; Series:PM5022; Inductance:2.2uH; Inductance Tolerance: /- 20 %; Terminal Type:PCB Surface Mount; Core Material:Ferrite; Current Rating:7.1A; Leaded Process Compatible:Yes; Mounting Type:Surface Mount
|
BOURNS INC
|
| PM3316-150M |
Inductor; Series:PM3316; Inductance:15uH; Inductance Tolerance: /- 20 %; Terminal Type:PCB Surface Mount; Core Material:Ferrite; Current Rating:3.1A; Leaded Process Compatible:No; Mounting Type:Surface Mount; Packaging:Tape And Reel
|
BOURNS INC
|
| BU2523 BU2523AF |
Inductor; Series:IHLP-2525CZ; Inductance:1.5uH; Inductance Tolerance: /- 20 %; Terminal Type:PCB Surface Mount; Current Rating:9A; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Packaging:Tape And Reel 扩散硅功率晶体管
Silicon Diffused Power Transistor
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| MA6X125 MA125 |
Microprocessor Crystal; Frequency:44MHz; Frequency Tolerance:20ppm; Load Capacitance:18pF; Crystal Terminals:Surface Mount (SMD, SMT); ESR:50ohm; Leaded Process Compatible:Yes; Mounting Type:Surface Mount RoHS Compliant: Yes
From old datasheet system
Silicon epitaxial planar type
Small-signal device - Diodes - Swicthing Diodes
|
Panasonic Corporation
PANASONIC[Panasonic Semiconductor]
|
| SI-3025LSA SI-3033LSA SI-3050LSA SI-3000LSA SI-301 |
Surface Mount Linear Regulator IC
SURFACE-MOUNT, LOW CURRENT CONSUMPTION, LOW DROPOUT VOLTAGE DROPPER TYPE
|
Sanken
ETC[ETC]
List of Unclassifed Manufacturers
|
| RPM-075PT |
Phototransistor, surface mount type 光电晶体管，表面贴装
Phototransistor/ surface mount type
|
Rohm Co., Ltd.
Rohm CO.,LTD.
|
| QTLP630 QTLP630C QTLP630C-2 QTLP630C-3 QTLP630C-4 |
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0805
Yellow Surface Mount LED Lamp - Standard Bright 0805
Green Surface Mount LED Lamp - Standard Bright 0805
AlGaAs Red Surface Mount LED Lamp - Standard Bright 0805
HER Surface Mount LED Lamp - Standard Bright 0805
Cree 430nm Blue Surface Mount LED Lamp (0805) Chip Type - Water Clear
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0805 SINGLE COLOR LED, YELLOW, 1.4 mm
|
FAIRCHILD[Fairchild Semiconductor]
Fairchild Semiconductor Corporation
Fairchild Semiconductor, Corp.
|
| 1410454 1410460 1410478 1410516 1410517 1410524 14 |
Bobbin Type Inductors
SPACER,.25L,.125 O.D,.047 I.D.
Unshielded Surface Mount Inductors 1 ELEMENT, 15000 uH, GENERAL PURPOSE INDUCTOR
LED MOUNT, RIGHT ANGLE 2 LEAD FOR T 1-3/4 NYLON NATURAL 1 ELEMENT, 10 uH, GENERAL PURPOSE INDUCTOR
Unshielded Surface Mount Inductors 1 ELEMENT, 470 uH, GENERAL PURPOSE INDUCTOR
LED MOUNT, RIGHT ANGLE 2 LEAD FOR T 1-3/4 NYLON NATURAL 1 ELEMENT, 100 uH, GENERAL PURPOSE INDUCTOR
Unshielded Surface Mount Inductors 1 ELEMENT, 22000 uH, GENERAL PURPOSE INDUCTOR
Unshielded Surface Mount Inductors 1 ELEMENT, 220 uH, GENERAL PURPOSE INDUCTOR
CAP 2.2UF 450V FILM BOX TYPE 10% 1 ELEMENT, 6800 uH, GENERAL PURPOSE INDUCTOR
Unshielded Surface Mount Inductors 1 ELEMENT, 6800 uH, GENERAL PURPOSE INDUCTOR
LED MOUNT, T1-3/4, FLUSH MNT, NYLON, NATURAL COLOR
SPACER,NYLON ROUND
|
C&D TECHNOLOGIES INC
CANDD[C&D Technologies]
|
| LGH1035 |
SMD Top View Type 3.5 × 2.7 × 1.8 mm(L×W×H) small size surface mount type
|
LUXPIA
|
| 15FMCJ91A 15FMCJ 15FMCJ10 15FMCJ100 15FMCJ100A 15F |
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 143V(min), 158V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 108V(min), 132V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 90.0V(min), 110V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 99.0V(min), 121V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 117V(min), 143V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 171V(min), 189V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 237V(min), 263V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 332V(min), 368V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 198V(min), 242V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 162V(min), 198V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 124V(min), 137V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 225V(min), 275V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 285V(min), 315V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 270V(min), 330V(max). For bidirectional use C or CA suffix.
10 GIG OPTIMIZED FIBER PATCH LC/LC
Fiber Optic Cable Assembly; Cable Length:49.2ft; Connector Type A:ST; Connector Type B:ST
FO CERAMIC 62.5 PLENUM ST-ST CONNECTORS 10M
FO CERAMIC 62.5 PLENUM ST-ST CONNECTORS 5M
Fiber Optic Cable Assembly; Cable Length:32.8ft; Connector Type A:ST; Connector Type B:ST; Drop Ship:Yes
Fiber Optic Cable Assembly; Cable Length:16.4ft; Connector Type A:ST; Connector Type B:ST; Drop Ship:Yes
10 GIG OPTIMIZED FIBER PATCH ST/ST
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 表面贴装瞬态电压抑制器
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 152V(min), 168V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 380V(min), 420V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 153V(min), 187V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 180V(min), 220V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 190V(min), 210V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 360V(min), 440V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 162V(min), 179V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 144V(min), 176V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 114V(min), 126V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 105V(min), 116V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 315V(min), 385V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 95.0V(min), 105V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 135V(min), 165V(max). For bidirectional use C or CA suffix.
Surface mount transient voltage suppressor (TVS). 1500W peak power, 5.0W steady state. Breakdown voltage 209V(min), 231V(max). For bidirectional use C or CA suffix.
|
RECTRON[Rectron Semiconductor]
|
|
